Відео

Thank you. Here is the link: ua-cam.com/video/Z0i_zWIfwk4/v-deo.html

Thank you. Here is the link: ua-cam.com/video/Z0i_zWIfwk4/v-deo.html

Thank you

It's actually not that difficult once you understand the idea behind it. Take your time. I am here to help if something is unclear.

You are welcome

What language are you translating in?

@@masterdentaltechnician1914 Plane english. I just wanted to see a sub , if happens to lose some words , it also helps when freezing the very quick video, to identify the image elements.

@@JohnDoew-hz8qt this video was actually uploaded with external subtitles. I believe it did not work as well as Intended. Thanks for letting me know.

WOW. 🙏❤️ Thank you so much for this great comment 👍

Thank you

You are correct. I should have done that in the video to set an example.

Yes you can

Yes. The new version of 3.2 is allowing that.

Yes it's possible in the 3.2 version of Exocad. Which version do you have?

Which Exoxad version do you have. It's possible with 3.2

What kind of experience do you have in Exocad?

@@masterdentaltechnician1914 I have experience in all types of work on ExoCAD except Surgical Guide and partial denture 

I have experience in all types of work on ExoCAD except Surgical Guide and partial denture 

@user-cn4jg7iq7j Sounds good. I will get back to you.

Thank you for your comment!!

Thank you

Thank you for the comment and watching the video!! ❤️👍

Thank you ❤️

Thank you too!

Thank you for the comment and watching the video!!

You are welcome

Thank you for the great comment

Thank you

You are welcome

Thank you for the comment and watching the video

Thank you

You are welcome

Thank you for the great comment and question. I was thinking about using Pink opaque on the TI bar but the lucitone curing resin blocked it out nicely. I did not see any color change even in intra oral photos. I used an Asiga 4K for that and milled Harvest Dental PMMA for the teeth, but you can also print the teeth.

Actually today I did another case like this and had to put a little bit tooth color opaque in one area because it was too close to the artificial tooth. It worked out great. To close the loop, yes, you and apply opaque but it's only necessary in specific areas where you need it

@masterdentaltechnician1914 Thank you for your answer. If you apply opaque, then you have to scan again or somehow alocate extra space for the opaque, right? By the way, using a bar or structure from the reinforced composite fibre (pink or white) will save us some more time 😅. (Wich you also shown in one of you wonderful videos).

@@alinmiron6657 there is enough space for a thin layer of opaque. If you plan ahead and know you want to apply opaque later make the gap larger as shown in the vudeo

Thank you 😀

It's not possible in 3Shape. You can do part of it there but you need to do the cutting part in Meshmixer

Thank you. It's an older video but still works. Did you see my newer ones?

I have no doubts. It's great to have options so you can choose what works best for you. Thanks for watching the video.

Correct. I don't like vacuum on ANY glaze cylcle. Layered PFM, Emax MIYO etc. I found that no vacuum will get you a nicer looking glaze with less Glaze paste. I see people putting tons of Glaze paste on their crowns because they want it shiny in one bake. Without vacuum you can achieve it with less Glaze. I also fire Structure without glaze and get a nicer texture.

That's correct. I would pick up the locator housing in the patient's mouth though. IOS scans are highly inaccurate when it comes to implant cases and cross arch accuracy. The point of this workflow is to get a headstart but it does not take away the fact that IOS scans are inaccurate.

@@masterdentaltechnician1914yes, pick-up in patients mouth is mandatory. But can acrylic base without internal metal substructure for locator housings work for longtime? Which PMMA, would you preffer for final restoration?

@kristijanmalus48 I use Lucetone 199 printed and milled/or printed teeth. You can use the milled PMMA from Harvest Dental for example. When you want internal bars see my other video on how to do those.ua-cam.com/video/vKp_jKLYmBE/v-deo.html

Which version of XOCAD are you using? Some of these tips do not work in 3.2 anymore.

@@masterdentaltechnician1914 3.1 rejika

There are several reasons why there is a failure. Usually it has to do with the cutter itself. 1) Check if you exported only 1 mesh as the cutter. Double meshes cause errors. 2) the cutter has some errors in itself. import the cutter into Meshmixer and inspect for errors. make the cutter a solid. Export and try again. 3) if you didn't rotate the cutter in the subtraction mode it might fail. The Meshmixer version usually helps.

@@masterdentaltechnician1914 Thank you very very much, I will try all 3 dots and get back here to let you know. I repeat, your wok in this video is really amazing.

@mariussava6126 if it's not working send me the file on Patreon and I will look at it.

@@masterdentaltechnician1914 Hi. I tried several times, both ways(make solid in meshmixer and loading as model am do bottoms) and it worked nicely. Now, understanding your ideea, it make sense, is logical....now I'm asking myself why I didn't think this way before... Thank you very much.

@mariussava6126 you are welcome. I use that technique on all locator and Conus cases to have an internal TI-Bar. If you haven't seen that technique I made a video about it. Thanks for the comment!!

You are welcome

Thank you

Let me upload them to my Patreon page tonight. I will post the link here in the comments

Good question. It depends on the manufacturer of the TI bases and the library code. if a system does not feature the angulation of screw channels then the feature won't show up. As a demo case I would use an Aurum TI base from Dess. Those have angulated features for sure.

@@masterdentaltechnician1914 👌 thanks Master!!!! In deed I have changed library and Voalá! Learn so much from your videos!!!

Thank you for the comment. This video has a portion of alignment in Exoxad. The difference of PIC and ICAM on a very high level it that PIC has 2 cameras and ICAM has 4. PIC offers direct to Implant scan flags. ICAM can move the camera while PIC has to be still. That's very high level information.

Thank you for the great comment. If you have time share the videos with others so they can learn as well 😀

Great. It's not available for the public yet but if you are interested I can get you something.

@@masterdentaltechnician1914 Thank you for responding. I have already checked that on the website. There are not any informations about this material Unfortunately, now I live outside the US but later I’ll let you know when I come back. Thanks again. Much appreciate

@@masterdentaltechnician1914 I have an idea but I don’t know how to do that. How to separate AOX and print gingiva and teeth separately?

@maxproc9406 did you check out this video: ua-cam.com/video/4fkvGtA5Hvg/v-deo.html

@@masterdentaltechnician1914Thank you🔥 I hope it will help me. You are master 👏🏻

Those are Straumann white caps used at the day of the surgery.

No I mean the ones used for aligning the palate. The ones places in the middle of the palate?

@Robdotfer07 those are arch tracers. digitalarches.com/collections/archtracer%e2%84%a2-the-only-fiducial-marker-you-will-ever-need

@@masterdentaltechnician1914 thank you

You are welcome

I will upload them tomorrow

Contact me at masterdentaltechnician@gmail.com please and we can chat

Oh and bleach shade pucks seem more fragile than other shades. Would that make a difference or is it just me? I’ve just returned to this field after 8yrs. A lot has changed and a lot to learn..

What tools do you use in green state?

Try Argen Zirconia, B&D origin or Upcerra. Those are very good brands that I have great success with